GyproPlastBond

GYPRO PLAST BOND bucket

GYPRO PLAST BOND

GYPRO PLAST BOND is a high-strength, cost-effective gypsum and cement plaster bonding agent. It delivers exceptional chemical adhesion and is ideal for bonding gypsum or cement plaster to concrete surfaces.

Waterproof

Protects surfaces with superior moisture resistance.

High Coverage

140 sq.ft per kg for cost-effective application.

Flexible Timing

Open time from 1 to 48 hours for plastering.

Advantages

Method of Application

  1. Thoroughly wash the concrete surface and allow it to dry for approximately 15 minutes.
  2. Apply GYPRO PLAST BOND evenly using a foam paint roller.
  3. Wait about 1 hour for the surface to become tacky, then apply plaster — this tacky state lasts up to 48 hours.
  4. Optionally, add green or blue color pigment for better visibility during application.

Note: Surface preparation and application conditions significantly affect bonding performance. Always follow manufacturer’s guidelines for best results.

Technical Parameters

Chemical Composition Hybrid Polymer
Physical Appearance Milky White Emulsion
Solid Contents More than 40%
Viscosity 1500 cps Max
pH Value 8-9
Butt Joint Strength >1 mpa
Film Characteristics Clear, forms flexible system

Storage and Handling

12 months when stored in a cool & dry place away from direct sunlight, in original sealed packing. Stocks should be used on a first in, first out basis.

Packing

20 kg buckets

Usage Tips & Warnings

Frequently Asked Questions

Can I use GYPRO PLAST BOND outdoors?

Yes, it can be used on exterior concrete surfaces with proper plaster protection.

Does it require mechanical keying?

No, its chemical bonding eliminates the need for hacking.

Request a Quote